All you have to do is call AT&T customer service (you can dial 611 from your AT&T phone or find their customer service number) and tell them you would like to have your iPhone unlocked. Provide the representative the IMEI number of the iPhone. They will verify it’s eligibility and have it released on their end in a matter of minutes (or they might put you in line and tell you it will take a few days, and that you will receive an email when it’s ready).

Once unlocked you will recieve the following letter from AT&T:

To complete the unlock, the letter advised you to connect to Itunes and backup and restore your Iphone. This will work to complete the unlock, but it will also destroy your jailbreak.

To enjoy a factory unlocked iPhone and maintain your jailbreak do the following:

1) Download redsnow from the Dev Team’s website.

2) Run redsnow (In administrator mode) and choose the Jailbreak button.

3) Follow the instructions on screen to put your iPhone in DFU mode.

4) Unchceck all the boxes on the next screen and only leave checked the option to Deactivate.

After that redsnow will deactivate your iPhone (this will take about 5 minutes).

Once the process is finished, load Itunes and follow its prompts,then you will immediately get the following unlock confirmation screen:

We offer the following services:

• Car door unlocking
• Lost Car Key Service
• Vehicle replacement keys
• Make keys
• Locked door and lock & key problems
• Key cutting/duplication
• Unlock trunk

Madison Locksmith can make a replacement key or a duplicate for your car if you lost your keys. Mechanical keys and transponder keys.  Just call Madison Locksmith at 608-255-2506 and we will get make you a new key.

MUL-T-LOCK At A Glance

What is MUL-T-LOCK all about?
Check out ‘MUL-T-LOCK At A Glance’.
Madison Locksmith brings you “MUL-T-LOCK At A Glance”. An interactive presentation by MUL-T-LOCK. Be sure to check out this video.

Watch this video on YouTube.

7 Seals

The quest for high security

This is the tale of mankind, the quest for peace of mind and a feeling of security. The deep internal need to protect the people and things that are precious to us. It is also our own tale.
Madison Locksmith brings you “The 7 Seals of MUL-T-LOCK”. An interactive presentation by MUL-T-LOCK. Be sure to check out this video.

Watch this video on YouTube.

The History Of Locks

From beginning of time until today

Madison Locksmith brings you “The History Of Locks”. An interactive presentation by MUL-T-LOCK about the origins of locks. Be sure to check out this video.

Watch this video on YouTube.

3 IN 1 Lock System From MUL-T-LOCK

A simple idea: the user changes lock combinations by changing keys.

The ‘3 IN 1’ cylinder has been designed by Mul-T-Lock to allow users to easily change their key combinations.
It’s a simple and speedy process the user inserts and operates the next key in a sequence of three keys and the introduction of each new key invalidates the previous key combination.

The product is packaged with three key types, colour-coded and clearly marked in a sequence, to guide the customer in the correct usage. First, they use the green set of keys. Then, when they need to change the combination, they start using the yellow key (after which the green key will automatically be cancelled). And if they need to change the combination again, they use the red key (after which both the yellow and green keys will automatically be cancelled).

When all three combinations have been used, the cylinder may be re-keyed by a Mul-T-Lock authorised locksmith. The ‘3 IN 1’ cylinder can be ordered with three separate duplicating cards for green, yellow and red keys

To Start:
The lock is installed by Madison Locksmith.

• Use the GREEN dotted key.

When you need to CHANGE your lock:
Open the YELLOW pouch, insert the yellow dotted key and operate the lock. The green key is now disabled.

• Use the YELLOW dotted key.

To CHANGE your lock AGAIN:
Open the RED pouch, insert the red dotted key and operate the lock. Now the yellow key is also disabled.

• Use the RED dotted key.

Need to change your lock again? Call Madison Locksmith your authorized MUL-T-LOCK dealer for details.

Each 3 in 1 lock includes:

• High-security lock cylinder.
• GREEN dotted keys and card set.
• YELLOW dotted key and card set (in pouch).
• RED dotted key and card set (in pouch).

STAY IN CONTROL WITH MUL-T-LOCK HIGH SECURITY

No Unauthorized Key Duplication and
Physical Protection

Mul-T-Lock high security solutions ensure unprecedented security for condominiums
by offering patent-protected Interactive® key control, which ensures that only
authorized individuals can obtain keys by presenting proper proof of identification.
In addition, Mul-T-Lock provides top physical protection against picking, drilling,
bumping and other forms of lock manipulation. Strong, durable, quality products
give you the certainty of knowing your condominium is thoroughly protected.

Control Visitor Access and
Eliminate Lost Key Concern

Our Interactive® CLIQ® electromechanical platform is an optimal choice for control
and peace of mind. Time based permission access allows the scheduling of keys
so that maintenance, housekeeping staff and other guests can be given access to
only certain doors during specific hours of the day. Plus, instant deactivation and
authorization of keys via user-friendly software ensures that a lost key causes no
breach in your security and replacement keys can be easily assigned.

One Key…Endless Possibilities

Madison Locksmith’s fully integrated systems and an extremely wide range of products for virtually
any application let you include our mechanical high security line, Interactive®
CLIQ® and even keyless entry/offline access control. So you can secure virtually all
applications on a single Mul-T-Lock system using mechanical security in some
areas, electromechanical in others and keyless entry elsewhere. And the best part -
you can operate all products and technologies with just one key!
That means that just one key can open everything from a padlock, to a file
cabinet, to the deadbolt on your front door!

MUL-T-LOCK’S High Security Solution

PROTECT YOUR HOME AGAINST EXISTING AND EMERGING LOCK BYPASS TECHNIQUE

What is Lock Bumping?

Lock bumping has long been familiar to certified locksmiths and
high security companies around the world. Mainly used as a method for professional
locksmiths to undo a misassembled cylinder on their workbench, rather than to gain
entry, this technique has recently surfaced in the mainstream media as an infamous
means for intruders to illegally gain access to homes, businesses, and institutions and
has raised many concerns among the general public.

The truth is that although lock bumping has always posed a potential threat to
consumers, the recent barrage of internet articles and demonstrations has introduced
this technique to an entirely new population of existing and would-be criminals. With
this in mind, the public must be made aware of the real threat that lock bumping poses
to their protection. But there is good news: there are many steps that you as a
consumer can take to prevent this from happening to you.

MUL-T-LOCK’S Defense Against Bumping

The most effective way to increase your protection against lock manipulation
techniques is to install a high security lock. Mul-T-Lock, the global leader in high
security locking, carries a wide array of products that offer bump-resistance as well as
the best defense against picking, drilling, and unauthorized key duplication. Our
world-wide experience has exposed us to lock manipulation techniques from all
around the globe, and we have used this knowledge to effectively arm our high
security products with ample defense mechanisms such as:

• Stainless steel mushroom pins, which are tapered and shouldered to create
  “false” shear lines while picking or bumping is being attempted
• Split pins, which resist bumping attempts by ensuring that force applied only
  separates half the plug pin leaving the shear line obstructed
• Our patented anti-picking pin set, which ensure that any time tension is
  applied, the top and bottom pins interlock to further deter attacks
• Our patented, enhanced design anti-drill pins, which resist drilling

More About MUL-T-LOCK High Security

Mul-T-Lock’s cylinders boast an impressive UL437 listing for pick and drill resistance
and meet or exceed the requirements of many international standard organizations such
as CEN, VDS, and SKJ. And Mul-T-Lock’s strict key control procedures, which ensure
that our unique patent-protected Interactive® keys never fall into the wrong hands,
virtually eliminates a criminal’s ability to even fashion a bump key.
Furthermore, Mul-T-Lock offers multiple types of locking solutions including mechanical
deadbolts, mortise locks, retrofit cylinders, padlocks, utility locks, multipoint locks, and
cylindrical locksets as well as an impressive electromechanical locking line that can all
be integrated into a single system; so high security doesn’t have to be complicated or
inconvenient. The bottom line is simply that when you consider the things that you’re
protecting: your home, your valuables and keepsakes, your money, and even your
family – high security just makes sense; the idea of using a $20 lock to protect a home
or business filled with things of immeasurable value doesn’t.

Tips from the Expert

In addition to installing a Mul-T-Lock high security lock to provide the ultimate
protection against unauthorized entry attempts, Madison Locksmith also offers the following
safety tips that you can use to prevent your home or business from becoming a
potential target. Knowing that you’ve taken every possible precaution to avoid un
authorized entry and that you are protected by Mul-T-Lock’s unbeatable high
security solution will improve your security and your peace of mind:

• Community Awareness – talk to your neighbors about organizing a
  neighborhood watch effort, or simply let them know when you will be out of town
  and ask them to keep an eye on your home while you’re away
• Clear Landscaping – keep the landscaping around your home as neat and revealing as possible. With less places for potential criminals to lurk, a wide open
  space will deter them from choosing your home or business as a potential target
• Well-Lit Exteriors – just as clearing away unnecessary trees and shrubbery
  deters criminals with the risk of getting caught, well-lit entrances and perimeters
  will discourage would-be intruders.
• Motion Sensors and Security Systems – added security measures such as
  motion sensors and alarm systems never hurt

Your MUL-T-LOCK keys come with a personal security card so no one but you can get a copy of your keys. The keys we provide you are exclusive to us. No one else can copy your key. When you come to our shop to get them duplicated, we make sure that for your protection you have the security card that came with the key. As oppose to other companies that just stamp the words “Do No Duplicate” on a key (which can still be duplicated at our shop or in any hardware store) our keys cannot be duplicated by anyone else but us.

When you get your key back after you gave it to someone (friend, babysitter etc.) you know there aren’t other copies floating around. If you get locked out of your house, instead of paying for a house lockout you can just call Madison Locksmith,get a new key made, and save a lot of money.

Keyed different

Mul-T-Lock’s traditional High Security equips each cylinder with its own combination – to be opened by keys that were either supplied with it or duplicated under Mul-T-Lock’s strict key control system.

Keyed alike

For outstanding customer convenience, Mul-T-Lock has developed the One-Key-Fits-All option, enabling users to open many locks – for example: home, office, garage & file cabinet – with a single key.

3 IN 1 cylinder

The ’3 IN 1′ cylinder has been designed by MUL-T-LOCK to allow users to easily change their key combinations on their own with out a locksmith. When we install your locks you get a set of 3 diffrent keys. The first key operates the lock. When you want to change the key that operates your lock you insert and operate the next key in the sequence of the three keys, and the introduction of each new key invalidates the previous key combination. When all three combinations have been used, the cylinder may be re-keyed by us.

TLO – Temporary Lock Out cylinder

MUL-T-LOCK’S TLO (Temporary Lock-Out) cylinder offers effective and reliable entrance control, without resorting to complex software and expensive electronic systems. Fully mechanical and user-friendly, the TLO is based on an innovative concept incorporating three keys: a blue key for ordinary use; a red lockout key, which, when turned in the cylinder, makes the door inaccessible to all blue keys; and a green reversal key, which reverses the red key effect, making the door accessible once more to regular blue keys. Thus, access of persons who hold a regular key to the door may be prevented for as long as the person in charge wishes, without the troublesome procedures of replacing the cylinder or collecting all keys. Access may also be restored easily at any time, at the turn of a green key.

MUL-T-LOCK’s Jimmy Proof Deadlock gives you flexible surface mounted deadlock protection. Combined together with a MUL-T-LOCK Rim Cylinder this deadlock can be supplied either in Single Cylinder configuration with a Thumbturn on the inside or in Double Cylinder Configuration.

Available Finishes:

Satin Chrome US26D

Bright Brass US3